Pickup dog boxes

K9 1-P Single Dog Box for Pickup Trucks

The K9 1-P Single Dog Box is a high-quality, bespoke single-compartment dog box designed to fit on top of an existing drawer unit or platform in a pickup truck with a canopy fitted.

Every K9 1-P is made to order to suit the individual customer’s vehicle, canopy, platform or drawer system and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the pickup it will be fitted to, helping you make the best possible use of the available load-bed space.

Designed for dog owners who need a secure, practical and durable transport solution, the K9 1-P provides one spacious dog compartment with a single lockable door, while allowing the remaining side of the pickup bed to stay available for storage or other equipment.

Bespoke Fit for Pickup Trucks, Drawer Systems and Canopies

The K9 1-P is designed to sit to one side of the pickup load area, on top of an existing drawer unit, raised platform or similar installation.

The box can be manufactured for installation on either the left-hand or right-hand side of the vehicle, depending on your preferred layout.

The maximum standard width is approximately 660mm, and the outer side of the box can be shaped to suit the profile of the canopy, helping maximise the available internal space while maintaining a neat fit inside the vehicle.

The standard depth is 1020mm. Longer boxes can also be manufactured as a bespoke option, subject to the available space in the vehicle and canopy.

The overall height is manufactured to suit the available canopy opening height, allowing the box to make effective use of the space while still being practical to install and remove.

Because every pickup, canopy and drawer installation can be different, we will work from the dimensions of your vehicle to manufacture a dog box suited to your available space.

Safe and Secure Single-Compartment Design

The K9 1-P incorporates one generously sized dog compartment with a single aluminium access door.

The door is manufactured with a stainless-steel mesh insert and fitted with our double-point locking system. When the handle is turned, two locking pins engage at the top and bottom of the door for increased strength and security.

A key-locking handle provides additional security, while a full-length stainless-steel hinge offers excellent durability for regular working use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 1-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Ventilation and Comfort

Ventilation is incorporated into the side and rear of the dog box as standard, using stainless-steel mesh ventilation apertures.

Standard ventilation slots are approximately 150mm high, helping provide good airflow throughout the compartment.

A 3mm internal rubber mat is also supplied as standard to provide a practical, comfortable and easy-to-clean floor surface.

For customers requiring additional ventilation, an internal fan system or two-way electric roof fan can be added as an optional extra.

Optional Lockable Side Escape Hatches

For pickups fitted with a canopy featuring side gull-wing windows, the Field 12-P dog box can also be manufactured with an optional lockable side escape hatch.

The escape hatch replaces the standard side ventilation mesh panel and provides an additional access point to the dog compartment through the side of the canopy.

For additional security, each escape hatch is fitted with two separate key-operated locks, helping keep the compartment securely closed when the vehicle is unattended.

A stainless-steel mesh ventilation insert is incorporated into the escape hatch, maintaining airflow through the dog compartment while providing the additional access point.

This option can be particularly useful for working dogs and handlers who want secondary access to the dog compartment, while retaining secure ventilation and a fully lockable installation.

The side escape hatch option is only suitable for pickups fitted with a canopy that has side gull-wing opening windows and must be specified when ordering.

Durable 6mm Polypropylene Construction

The K9 1-P is manufactured from 6mm polypropylene with a leather-grain-effect finish.

This material provides a strong, practical and low-maintenance construction suitable for regular use in pickup trucks and working vehicles.

The lower section of the box is designed to be watertight up to the top of the door sill, helping contain water during cleaning. A drainage plug is fitted to make washing out and maintaining the box easier.

Securing shackles are fitted to the dog box, allowing the unit to be restrained using suitable vehicle fixing points.

Standard Features

The K9 1-P includes:

• Bespoke construction to suit your pickup truck, canopy and existing drawer unit or platform
• Single spacious dog compartment
• Designed to fit on either the left-hand or right-hand side of the pickup
• Maximum standard width of approximately 660mm
• Outer side shaped to suit the canopy profile where required
• Standard depth of 1020mm
• Longer bespoke depths available
• Height manufactured to suit the available canopy opening
• One aluminium door with stainless-steel mesh insert
• Key-locking door handle
• Double-point top and bottom door locking system
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinge
• 3mm internal rubber mat
• Side and rear stainless-steel mesh ventilation apertures
• Approximately 150mm-high ventilation slots as standard
• Securing shackles
• Drainage plug to assist cleaning
• Watertight lower section up to the top of the door sill
• 6mm polypropylene construction with leather-grain-effect finish

Price

The K9 1-P Single Dog Box is £760 including VAT and fitting.

The standard box is manufactured to a depth of 1020mm. Longer boxes and other non-standard requirements can be manufactured as bespoke options and quoted individually.

Please contact us with your vehicle, canopy and drawer or platform details so we can confirm the dimensions and suitability for your installation.

Made to Order for Your Pickup

The K9 1-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification, allowing us to take account of the pickup model, canopy design, existing drawer or platform installation, available opening height and any optional equipment you would like incorporated.

Whether you require the box positioned on the left or right side of the vehicle, shaped around the canopy profile or manufactured longer than the standard 1020mm depth, we can discuss the best configuration for your pickup.

If you require a different size or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup dog box designs and custom configurations.

Delivery can also be arranged. Delivery charges are quoted according to location.

K9 2-P Double Dog Box for Pickup Trucks

The K9 2-P Double Dog Box is a high-quality, bespoke double-compartment dog box designed to fit between the wheel arches of a pickup truck with a canopy fitted.

Every K9 2-P is made to order to suit the individual customer’s vehicle, canopy and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the pickup it will be fitted to, helping you make the best possible use of the available load-bed space.

Designed for dog owners who need a secure, practical and durable transport solution, the K9 2-P provides two separate dog compartments with individual lockable doors while retaining the flexibility to remove the complete box when full use of the pickup bed is required.

Bespoke Fit for UK Pickup Trucks and Canopies

The K9 2-P can be manufactured to suit UK pickup truck models and a wide range of canopy designs.

The box is normally designed to fit neatly between the pickup’s wheel arches, with a maximum standard width of approximately 1140mm. Wider or alternative configurations may also be possible and can be quoted individually.

The depth can be manufactured to your requirements, while the overall height is determined by the available canopy opening, up to a maximum standard height of approximately 820mm.

Because every vehicle and canopy installation can be different, we will work from the dimensions of your pickup to produce a dog box suited to your available space.

Safe, Secure Double-Compartment Design

The K9 2-P incorporates two individual dog compartments, allowing two dogs to travel separately and securely.

A removable centre divider is fitted as standard, giving you additional flexibility when configuring the internal space.

Each compartment has its own aluminium door with a stainless-steel mesh insert and our double-point locking system. When the handle is turned, two locking pins engage at the top and bottom of the door for increased strength and security.

Each door is also fitted with a full-length stainless-steel hinge and our integrated stainless-steel mesh construction, creating a strong and durable door designed for regular working and everyday use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 2-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Ventilation and Comfort

Ventilation is incorporated into the side and rear of the dog box as standard, using stainless-steel mesh ventilation apertures.

Standard ventilation slots are approximately 150mm high, helping provide airflow through both compartments.

A 3mm internal rubber mat is also supplied as standard to provide a practical, comfortable and easy-to-clean floor surface.

For customers requiring additional ventilation, an internal fan system or two-way electric roof fan can be added as an optional extra.

Optional Lockable Side Escape Hatches

For pickups fitted with a canopy featuring side gull-wing windows, the K9 2-P double dog box can also be manufactured with optional lockable side escape hatches.

An escape hatch can be fitted to one side or both sides of the dog box, depending on the canopy design and your preferred access arrangement.

Each escape hatch replaces the standard side ventilation mesh panel and provides an additional access point to the relevant dog compartment through the side of the canopy.

For additional security, each escape hatch is fitted with two separate key-operated locks, helping keep the compartment securely closed when the vehicle is unattended.

A stainless-steel mesh ventilation insert is incorporated into each escape hatch, maintaining airflow through the dog compartment while still providing the additional access point.

This option can be particularly useful for working dogs and professional handlers who want secondary access to one or both dog compartments, while retaining secure ventilation and a fully lockable installation.

The side escape hatch option is only suitable for pickups fitted with a canopy that has side gull-wing opening windows and must be specified when ordering.

Durable 6mm Polypropylene Construction

The K9 2-P is manufactured from 6mm polypropylene with a leather-grain-effect finish.

This material provides a strong, practical and low-maintenance construction suitable for regular use in pickup trucks and working vehicles.

The lower section of the box is designed to be watertight up to the top of the door sill, helping contain water during cleaning. A drainage plug is fitted to make washing out and maintaining the box easier.

Securing shackles are fitted to both sides of the dog box, allowing the unit to be restrained using suitable vehicle fixing points.

Standard Features

The K9 2-P includes:

• Bespoke construction to suit your pickup truck and canopy
• Two separate dog compartments
• Two aluminium doors with stainless-steel mesh inserts
• Key-locking door handles
• Double-point top and bottom door locking system
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinges
• Removable centre divider
• 3mm internal rubber mat
• Side and rear stainless-steel mesh ventilation apertures
• Approximately 150mm-high ventilation slots as standard
• Securing shackles fitted to both sides
• Drainage plug to assist cleaning
• Watertight lower section up to the top of the door sill
• 6mm polypropylene construction with leather-grain-effect finish
• Professional fitting

Example Sizes and Prices

As every K9 2-P is made to order, the depth can be manufactured to suit your requirements. The following sizes provide an indication of how the price changes according to box depth:

760mm deep – £920 including VAT and fitting

1020mm deep – £980 including VAT and fitting

1220mm deep – £1,135 including VAT and fitting

These are example depths only. We can manufacture the K9 2-P to alternative dimensions, subject to the available space in your pickup truck and canopy.

Please contact us with your vehicle, canopy details and required dimensions for a bespoke quotation.

Made to Order for Your Pickup

The K9 2-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification, allowing us to take account of the pickup model, canopy design, available opening, required depth and any optional equipment you would like incorporated.

If you require a different size or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup dog box designs and custom configurations.

All stated prices include VAT and fitting.

Delivery can also be arranged. Delivery charges are quoted according to location.

K9 W1-P Single Dog Box for Pickup Trucks

The K9 W1-P Single Dog Box is a high-quality, bespoke single-compartment dog box designed to fit partly over either the left- or right-hand wheel arch of a pickup truck with a canopy fitted.

Every K9 W1-P is made to order to suit the individual customer’s vehicle, canopy and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the pickup it will be fitted to, helping you make the best possible use of the available load-bed space.

By designing the lower section of the box around one of the pickup’s wheel arches, the K9 W1-P allows space above the wheel arch to be utilised rather than lost, while still leaving more of the remaining pickup bed available for other equipment, storage or working use.

Designed for dog owners who need a secure, practical and durable transport solution, the K9 W1-P provides one spacious dog compartment with an individual lockable door while retaining the flexibility to remove the complete box when full use of the pickup bed is required.

Bespoke Fit Over Your Pickup Wheel Arch

The K9 W1-P can be manufactured to suit UK pickup truck models and a wide range of canopy designs.

The box is specifically designed to fit partly over one of the rear wheel arches, with the customer able to choose either a left-hand or right-hand wheel-arch configuration depending on the layout of the vehicle and how the remaining load-bed space is to be used.

The standard box can be manufactured up to approximately 660mm wide, but can be made wider as a bespoke solution.

The depth can be manufactured to your requirements, up to approximately 1020mm as standard, while the overall height is determined by the available canopy opening.

Because every pickup and canopy installation can be different, we will work from the dimensions of your vehicle to produce a dog box suited to the available space.

Space-Efficient Single-Compartment Design

The K9 W1-P incorporates one individual dog compartment while making use of the otherwise restricted space around the pickup’s wheel arch.

The lower section of the box is shaped to accommodate the wheel arch, allowing the main compartment to extend above it and maximise the usable internal space.

This design is particularly useful for customers who only require a single dog compartment and want to retain as much of the remaining pickup bed as possible for tools, equipment, storage or general working use.

The aluminium door incorporates a stainless-steel mesh insert together with our double-point locking system. When the handle is turned, two locking points engage at the top and bottom of the door for increased strength and security.

Each door is also fitted with a full-length stainless-steel hinge and our integrated stainless-steel mesh construction, creating a strong and durable door designed for regular working and everyday use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 W1-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Ventilation and Comfort

Ventilation is incorporated into the side and rear of the dog box as standard using stainless-steel mesh ventilation apertures.

These ventilation areas help provide airflow through the compartment while maintaining a strong and durable construction.

A 3mm internal rubber mat is also supplied as standard to provide a practical, comfortable and easy-to-clean floor surface.

Additional ventilation options may also be available depending on the size and design of the box required.

Optional Lockable Side Escape Hatches

For pickups fitted with a canopy featuring side gull-wing windows, the K9 W1-P double dog box can also be manufactured with optional lockable side escape hatches.

An escape hatch can be fitted to one side or both sides of the dog box, depending on the canopy design and your preferred access arrangement.

Each escape hatch replaces the standard side ventilation mesh panel and provides an additional access point to the relevant dog compartment through the side of the canopy.

For additional security, each escape hatch is fitted with two separate key-operated locks, helping keep the compartment securely closed when the vehicle is unattended.

A stainless-steel mesh ventilation insert is incorporated into each escape hatch, maintaining airflow through the dog compartment while still providing the additional access point.

This option can be particularly useful for working dogs and professional handlers who want secondary access to one or both dog compartments, while retaining secure ventilation and a fully lockable installation.

The side escape hatch option is only suitable for pickups fitted with a canopy that has side gull-wing opening windows and must be specified when ordering.

Durable Polypropylene Construction

The K9 W1-P is manufactured from durable polypropylene with a leather-grain-effect finish.

This material provides a strong, practical and low-maintenance construction suitable for regular use in pickup trucks and working vehicles. It is also rot and rust proof, making it particularly suited to demanding outdoor and working environments.

The lower section of the box is designed to be sealed to help contain water during cleaning, and a drainage plug is fitted to make washing out and maintaining the compartment easier.

Securing shackles are fitted to allow the box to be restrained using suitable vehicle fixing points.

Slotted side handles are also incorporated into the design to assist when handling or removing the box from the vehicle.

Standard Features

The K9 W1-P includes:

• Bespoke construction to suit your pickup truck and canopy
• Single dog compartment
• Designed to fit partly over either the left- or right-hand rear wheel arch
• Choice of left-hand or right-hand wheel-arch configuration
• Up to approximately 660mm overall width as standard
• Depth manufactured to your requirements, up to approximately 1020mm as standard
• Height manufactured to suit the available canopy opening
• Aluminium door with stainless-steel mesh insert
• Key-locking door handle
• Double-point top and bottom door locking system
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinge
• 3mm internal rubber mat
• Side and rear stainless-steel mesh ventilation apertures
• Slotted side handles
• Securing shackles
• Drainage plug to assist cleaning
• Sealed lower section to assist washing and maintenance
• Rot and rust proof construction
• Polypropylene construction with leather-grain-effect finish

Price

K9 W1-P – £840 including VAT and fitting

The final dimensions of the box can be manufactured to suit the available space in your pickup truck and canopy.

The depth and width do not have to be the maximum size. We can manufacture the box to the depth and/or width you require, allowing the design to be tailored around your dogs, your equipment and the amount of load-bed space you wish to retain.

Please contact us with your pickup model, canopy details, preferred wheel-arch side and required dimensions for a bespoke quotation.

Made to Order for Your Pickup

The K9 W1-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification, allowing us to take account of the pickup model, canopy design, wheel-arch position, available opening, required depth and any additional features you may require.

The box can be manufactured for installation over either the left-hand or right-hand wheel arch, making it possible to configure the vehicle around your individual storage and working requirements.

If you require a different size or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup dog box designs and custom configurations.

Delivery can also be arranged. Delivery charges are quoted according to location.

K9 W2-P Double Dog Box for Pickup Trucks

The K9 W2-P Double Dog Box is a high-quality, bespoke two-compartment dog box designed to fit over both rear wheel arches of a pickup truck with a canopy fitted.

Every K9 W2-P is made to order to suit the individual customer’s vehicle, canopy and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the pickup it will be fitted to, helping you make the best possible use of the available load-bed space.

Unlike the K9 W1-P, which is designed to fit partly over one wheel arch, the K9 W2-P spans across the full width of the pickup load bed and over both wheel arches, with the overall width manufactured to suit the tailgate opening.

The K9 W2-P can be manufactured up to approximately 1345mm wide as standard, depending on the vehicle and canopy installation.

Designed for customers who need to transport many dogs, and who want the flexibility of separate compartments within one full-width dog box, the K9 W2-P is supplied as standard with two individual lockable doors and a removable centre divider.

This allows the box to be used as two separate dog compartments or, when required, as one larger open compartment by removing the divider.

Bespoke Full-Width Fit Over Both Wheel Arches

The K9 W2-P can be manufactured to suit UK pickup truck models and a wide range of canopy designs.

The lower section of the box is specifically shaped to accommodate both rear wheel arches, allowing the dog box to extend across the width of the pickup bed while making use of the otherwise restricted space above the wheel arches.

The overall width is manufactured to suit the available tailgate and canopy opening, up to approximately 1345mm wide as standard.

The depth can be manufactured to your requirements, up to approximately 1,220mm as standard, while the overall height is determined by the available canopy opening.

Because every pickup and canopy installation can be different, we will work from the dimensions of your vehicle to produce a dog box suited to the available space.

Two Compartments with Removable Divider

The K9 W2-P is supplied as standard with a removable centre divider, providing greater flexibility in how the box can be used.

With the divider fitted, the K9 W2-P provides two separate dog compartments, each with its own individual door.

The divider can also be removed to create one larger full-width compartment, making the box suitable for larger dogs or situations where a divided layout is not required.

This flexibility makes the K9 W2-P particularly useful for customers whose requirements may change depending on the dogs being transported.

Two Individual Lockable Doors

The K9 W2-P is fitted with two individual aluminium doors, allowing independent access to each side of the dog box.

Each door incorporates a stainless-steel mesh insert together with our double-point locking system. When the handle is turned, two locking points engage at the top and bottom of the door for increased strength and security.

Each door is fitted with a key-locking handle, allowing the compartments to be securely locked when required.

Each door is also fitted with a full-length stainless-steel hinge and our integrated stainless-steel mesh construction, creating a strong and durable door designed for regular working and everyday use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 W2-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Ventilation and Comfort

Ventilation is incorporated into the side and rear of the dog box as standard using stainless-steel mesh ventilation apertures.

These ventilation areas help provide airflow through both compartments while maintaining a strong and durable construction.

A 3mm internal rubber mat is also supplied as standard to provide a practical, comfortable and easy-to-clean floor surface.

Additional ventilation options may also be available depending on the size and design of the box required.

Optional Lockable Side Escape Hatches

For pickups fitted with a canopy featuring side gull-wing windows, the K9 W2-P double dog box can also be manufactured with optional lockable side escape hatches.

An escape hatch can be fitted to one side or both sides of the dog box, depending on the canopy design and your preferred access arrangement.

Each escape hatch replaces the standard side ventilation mesh panel and provides an additional access point to the relevant dog compartment through the side of the canopy.

For additional security, each escape hatch is fitted with two separate key-operated locks, helping keep the compartment securely closed when the vehicle is unattended.

A stainless-steel mesh ventilation insert is incorporated into each escape hatch, maintaining airflow through the dog compartment while still providing the additional access point.

This option can be particularly useful for working dogs and professional handlers who want secondary access to one or both dog compartments, while retaining secure ventilation and a fully lockable installation.

The side escape hatch option is only suitable for pickups fitted with a canopy that has side gull-wing opening windows and must be specified when ordering.

Durable Polypropylene Construction

The K9 W2-P is manufactured from durable polypropylene with a leather-grain-effect finish.

This material provides a strong, practical and low-maintenance construction suitable for regular use in pickup trucks and working vehicles. It is also rot and rust proof, making it particularly suited to demanding outdoor and working environments.

The lower section of the box is designed to be sealed to help contain water during cleaning, and a drainage plug is fitted to make washing out and maintaining the compartments easier.

Securing shackles are fitted to allow the box to be restrained using suitable vehicle fixing points.

Slotted side handles are also incorporated into the design to assist when handling or removing the box from the vehicle.

Standard Features

The K9 W2-P includes:

• Bespoke construction to suit your pickup truck and canopy
• Full-width design spanning both rear wheel arches
• Designed to fit over both pickup wheel arches
• Up to approximately 1345mm overall width as standard, depending on the tailgate and canopy opening
• Depth manufactured to your requirements, up to approximately 1,220mm as standard
• Height manufactured to suit the available canopy opening
• Two individual dog compartments
• Removable centre divider supplied as standard
• Can be used as two separate compartments or one larger open compartment
• Two aluminium doors with stainless-steel mesh inserts
• Two key-locking door handles
• Double-point top and bottom door locking system on each door
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinges
• 3mm internal rubber mat
• Side and rear stainless-steel mesh ventilation apertures
• Slotted side handles
• Securing shackles
• Drainage plug to assist cleaning
• Sealed lower section to assist washing and maintenance
• Rot and rust proof construction
• Polypropylene construction with leather-grain-effect finish

Price

K9 W2-P – £1,620 inclusive of VAT and fitting

The final dimensions of the box can be manufactured to suit the available space in your pickup truck and canopy.

The depth and width do not have to be the maximum size. We can manufacture the box to the depth you require, allowing the design to be tailored around your dogs, your equipment and the layout of your pickup.

The maximum standard width is approximately 1345mm, but the actual width will normally be determined by the available tailgate and canopy opening of the vehicle.

Please contact us with your pickup model, canopy details and required dimensions for a bespoke quotation.

Made to Order for Your Pickup

The K9 W2-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification, allowing us to take account of the pickup model, canopy design, wheel-arch dimensions, available tailgate opening, required depth and any additional features you may require.

By fitting over both rear wheel arches and extending across the available width of the pickup bed, the K9 W2-P makes efficient use of the available space while providing a practical and secure solution for transporting multiple dogs.

The standard removable divider and two-door configuration gives you the flexibility to use the box as either two separate compartments or one larger compartment.

If you require a different size or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup dog box designs and custom configurations.

Delivery can also be arranged. Delivery charges are quoted according to location.

K9 Outback 1-P Single Dog Box for Open-Back Pickup Trucks

The K9 Outback 1-P Single Dog Box is a high-quality, bespoke single-compartment dog box designed specifically for open-back pickup trucks without a canopy fitted.

Every K9 Outback 1-P is made to order to suit the individual customer’s pickup truck, dog and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the vehicle it will be fitted to, allowing us to make the best possible use of the available load-bed space.

Designed for dog owners who require a secure, practical and durable solution for transporting one or more dogs, the Outback 1-P provides one large dog compartment with an individual lockable door, together with weather-protection features specifically suited to use on an exposed pickup bed.

Bespoke Fit for Open-Back Pickup Trucks

The K9 Outback 1-P is designed for UK pickup trucks with an open load bed and no canopy fitted.

The K9 Outback 2-P is normally manufactured to fit neatly between the pickup truck’s wheel arches, with widths of up to approximately 1140mm. Alternative dimensions can also be manufactured where required

The depth can be manufactured to suit your requirements, allowing the dog box to be tailored to the available load-bed space and the size of dog being transported.

A typical Outback 1-P is approximately 686mm high at the front and 635mm high at the rear. This creates a gently sloping roof that helps rainwater run towards the rear of the box rather than towards the door.

Because pickup models, load beds and customer requirements vary, every Outback 1-P is individually manufactured rather than being supplied as an off-the-shelf box.

If you require a different width, depth, height or configuration, please contact us with your requirements and we can discuss a bespoke design.

Designed for Exposed Pickup Beds

Unlike dog boxes intended for use beneath a pickup canopy, the K9 Outback 1-P incorporates additional features to help protect the dog and interior from the weather.

A storm peak above the front door helps deflect rain away from the door opening, while the deep 150mm front sill provides additional protection against water entering the compartment.

The sloping roof assists with water run-off, and a removable door cover is supplied for additional protection during particularly poor weather.

These features make the Outback 1-P particularly suitable for customers who need a permanent or regularly used dog box for an open-back pickup truck.

Secure Single-Compartment Design

The K9 Outback 1-P incorporates one large dog compartment, providing a spacious and secure area for transporting one dog.

Unlike the K9 Outback 2-P, the 1-P is manufactured without a centre divider, allowing the dog to make use of the full internal width of the box.

The compartment has an aluminium door with a stainless-steel mesh insert, providing a strong and practical combination of security and ventilation.

The door is fitted with a key-locking handle and double-point locking system. When the door is locked, the mechanism secures it at both the top and bottom for increased strength and security.

Each door is also fitted with a full-length stainless-steel hinge and our integrated stainless-steel mesh construction, creating a strong and durable door designed for regular working and everyday use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 Outback 1-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Weather Protection

Because the Outback 1-P is designed for use without a pickup canopy, weather protection forms an important part of the design.

Standard weather-protection features include:

• Sloping roof to assist rainwater run-off
• Front storm peak above the door
• Deep 150mm front door sill
• Removable door cover for severe weather
• Watertight lower section
• Drain plug to assist cleaning and drainage

The combination of these features helps provide a practical dog transport solution for customers who regularly use their pickup in exposed conditions.

Durable 6mm Polypropylene Construction

The K9 Outback 1-P is manufactured from 6mm polypropylene with a leather-grain-effect finish.

This material provides a strong, durable and low-maintenance construction suitable for regular use in working pickup trucks, shooting vehicles, country vehicles and everyday dog transport.

The lower section of the dog box is designed to be watertight up to the top of the door sill, helping contain water when the box is being washed out.

A drain plug is fitted to make cleaning and maintenance easier.

A 3mm internal rubber mat is also supplied as standard, providing a practical, comfortable and easy-to-clean floor surface for the dog.

Roof Handles and Securing Points

Grab handles are incorporated into the roof of the K9 Outback 1-P to help when positioning or removing the dog box.

Securing shackles are fitted to the sides of the box, allowing it to be restrained using suitable fixing points within the pickup bed.

This means the complete dog box can be removed when required, allowing full use of the pickup load bed when the box is not needed.

Standard Features

The K9 Outback 1-P includes:

• Bespoke construction to suit your pickup truck and requirements
• One large dog compartment
• One aluminium door with stainless-steel mesh insert
• Key-locking door handle
• Double-point top and bottom door locking system
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinge
• Front storm peak for additional weather protection
• Sloping roof to assist water run-off
• Roof-mounted grab handles
• Deep 150mm front sill
• Removable door cover for additional weather protection
• 3mm internal rubber mat
• Watertight lower section up to the top of the door sill
• Drain plug to assist cleaning
• Securing shackles fitted to the sides
• 6mm polypropylene construction with leather-grain-effect finish

Example Sizes and Prices

As every K9 Outback 1-P is made to order, the depth can be manufactured to suit your vehicle and requirements.

The following sizes provide an indication of pricing:

765 mm deep – £780 including VAT and fitting

1,020 mm deep – £890 including VAT and fitting

1220 mm deep – £1,045 including VAT and fitting

These are example sizes only. The K9 Outback 1-P can be manufactured to alternative dimensions to suit your pickup truck, available load-bed space and dog.

If the size you require is not shown above, please contact us with your preferred dimensions and we will provide a bespoke quotation.

Made to Order for Your Pickup Truck

The K9 Outback 1-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification.

This allows us to take account of:

• Your make and model of pickup truck
• The available space between the wheel arches
• Required box width, depth and height
• The size of dog being transported
• Your preferred configuration
• Any additional equipment or optional features you would like incorporated

Whether your pickup is used for working dogs, shooting, beating, picking-up, gundog training or general dog transport, we can manufacture the Outback 1-P to suit your individual requirements.

If you require a different size, additional ventilation or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup truck dog boxes and custom dog transport solutions.

K9 Outback 2-P Double Dog Box for Open-Back Pickup Trucks

The K9 Outback 2-P Double Dog Box is a high-quality, bespoke double-compartment dog box designed specifically for open-back pickup trucks without a canopy fitted.

Every K9 Outback 2-P is made to order to suit the individual customer’s pickup truck, dogs and requirements. We do not manufacture standard stock boxes. Each dog box is built specifically for the vehicle it will be fitted to, allowing us to make the best possible use of the available load-bed space.

Designed for dog owners who require a secure, practical and durable solution for transporting two dogs, the Outback 2-P provides two separate dog compartments with individual lockable doors, together with weather-protection features specifically suited to use on an exposed pickup bed.

Bespoke Fit for Open-Back Pickup Trucks

The K9 Outback 2-P is designed for UK pickup trucks with an open load bed and no canopy fitted.

The K9 Outback 2-P is normally manufactured to fit neatly between the pickup truck’s wheel arches, with widths of up to approximately 1140mm. Alternative dimensions can also be manufactured where required

The depth can be manufactured to suit your requirements, allowing the dog box to be tailored to the available load-bed space and the size of dogs being transported.

A typical Outback 2-P is approximately 686mm high at the front and 635mm high at the rear. This creates a gently sloping roof that helps rainwater run towards the rear of the box rather than towards the doors.

Because pickup models, load beds and customer requirements vary, every Outback 2-P is individually manufactured rather than being supplied as an off-the-shelf box.

If you require a different width, depth, height or configuration, please contact us with your requirements and we can discuss a bespoke design.

Designed for Exposed Pickup Beds

Unlike dog boxes intended for use beneath a pickup canopy, the K9 Outback 2-P incorporates additional features to help protect the dogs and interior from the weather.

A storm peak above the front doors helps deflect rain away from the door openings, while the deep 150mm front sill provides additional protection against water entering the compartments.

The sloping roof assists with water run-off, and removable door covers are supplied for additional protection during particularly poor weather.

These features make the Outback 2-P particularly suitable for customers who need a permanent or regularly used dog box for an open-back pickup truck.

Secure Double-Compartment Design

The K9 Outback 2-P incorporates two separate dog compartments, allowing two dogs to travel individually and securely.

A removable centre divider is fitted as standard. This provides additional flexibility and allows the internal layout to be adapted when required.

Each compartment has its own aluminium door with a stainless-steel mesh insert, providing a strong and practical combination of security and ventilation.

Each door is fitted with a key-locking handle and double-point locking system. When the door is locked, the mechanism secures it at both the top and bottom for increased strength and security.

Each door is also fitted with a full-length stainless-steel hinge and our integrated stainless-steel mesh construction, creating a strong and durable door designed for regular working and everyday use.

 

Picture 1 showing top pin in door opening position, Picture 2 showing top pin in door closed position, Picture 3 showing bottom pin.

Integrated Stainless-Steel Door Mesh

A major strength of the K9 Outback 2-P dog box is the way the stainless-steel door mesh is built into the door frame during manufacture.

Rather than simply being tack welded onto the outside of the finished door, the stainless-steel mesh is inserted into the aluminium door section during the welding stage, so the surrounding door construction locks the mesh securely into position.

This creates an extremely strong door assembly and prevents dogs inside the box from getting behind an exposed mesh edge and attempting to pull or peel the mesh away from the frame.

The result is a much more secure and durable construction than a surface-mounted mesh panel, making it particularly suitable for strong, active working dogs and regular professional use.

This integrated mesh construction is a key feature of our dog box doors and is used to provide additional strength, security and long-term durability.

Stainless-steel mesh integrated into the dog box door section during manufacture, locking the mesh securely into the frame rather than simply attaching it to the outer face.

Weather Protection

Because the Outback 2-P is designed for use without a pickup canopy, weather protection forms an important part of the design.

Standard weather-protection features include:

• Sloping roof to assist rainwater run-off
• Front storm peak above the doors
• Deep 150mm front door sill
• Removable door covers for severe weather
• Watertight lower section
• Drain plug to assist cleaning and drainage

The combination of these features helps provide a practical dog transport solution for customers who regularly use their pickup in exposed conditions.

Durable 6mm Polypropylene Construction

The K9 Outback 2-P is manufactured from 6mm polypropylene with a leather-grain-effect finish.

This material provides a strong, durable and low-maintenance construction suitable for regular use in working pickup trucks, shooting vehicles, country vehicles and everyday dog transport.

The lower section of the dog box is designed to be watertight up to the top of the door sill, helping contain water when the box is being washed out.

A drain plug is fitted to make cleaning and maintenance easier.

A 3mm internal rubber mat is also supplied as standard, providing a practical, comfortable and easy-to-clean floor surface for the dogs.

Roof Handles and Securing Points

Grab handles are incorporated into the roof of the K9 Outback 2-P to help when positioning or removing the dog box.

Securing shackles are fitted to the sides of the box, allowing it to be restrained using suitable fixing points within the pickup bed.

This means the complete dog box can be removed when required, allowing full use of the pickup load bed when the box is not needed.

Standard Features

The K9 Outback 2-P includes:

• Bespoke construction to suit your pickup truck and requirements
• Two separate dog compartments
• Two aluminium doors with stainless-steel mesh inserts
• Key-locking door handles
• Double-point top and bottom door locking system
• Stainless-steel door mesh integrated into the door frame during manufacture
• Mesh locked into the door section rather than surface tack welded
• Door construction designed to prevent dogs pulling or peeling the mesh away from the frame
• Full-length stainless-steel door hinges
• Removable centre divider
• Front storm peak for additional weather protection
• Sloping roof to assist water run-off
• Roof-mounted grab handles
• Deep 150mm front sill
• Removable door covers for additional weather protection
• 3mm internal rubber mat
• Watertight lower section up to the top of the door sill
• Drain plug to assist cleaning
• Securing shackles fitted to the sides
• 6mm polypropylene construction with leather-grain-effect finish

Example Sizes and Prices

As every K9 Outback 2-P is made to order, the depth can be manufactured to suit your vehicle and requirements.

The following sizes provide an indication of pricing:

760mm deep – £920 including VAT and fitting

1020mm deep – £980 including VAT and fitting

1220mm deep – £1,135 including VAT and fitting

These are example sizes only. The K9 Outback 2-P can be manufactured to alternative dimensions to suit your pickup truck, available load-bed space and dogs.

If the size you require is not shown above, please contact us with your preferred dimensions and we will provide a bespoke quotation.

Made to Order for Your Pickup Truck

The K9 Outback 2-P is not an off-the-shelf dog box. Every box is manufactured to the individual customer’s specification.

This allows us to take account of:

• Your make and model of pickup truck
• The available space between the wheel arches
• Required box width, depth and height
• The size and number of dogs being transported
• Your preferred configuration
• Any additional equipment or optional features you would like incorporated

Whether your pickup is used for working dogs, shooting, beating, picking-up, gundog training or general dog transport, we can manufacture the Outback 2-P to suit your individual requirements.

If you require a different size, additional ventilation or a feature that is not listed above, please contact us. We are happy to discuss bespoke pickup truck dog boxes and custom dog transport solutions.