Single drawer unit featuring an
"Air glide" system, (easy to clean with no greased metal drawer
runners that attract grit, hair & mud). Full length drawer to fit half of
the width between the wheel arches with a lockable stainless-steel catch and a
3mm mat in the liner.
Side box/cabinet to fill the
space between the drawer and the tailgate opening, fitted up to the wheel arch,
with a lockable stainless-steel paddle latch.
Large CAB1 style box built around the wheel arch up to 660mm wide & 1016mm deep, with the
height determined by your canopy design. Box will have one key locking door
with plastic door handle, 3mm internal mat, side, and rear stainless-steel ventilation
apertures 150mm high, front drain plug to assist in cleaning and a 3-sided tray
on top of the drawer unit, with a 3mm rubber mat to stop stored items moving
around.
STANDARD FEATURES:
- Aluminium doors with stainless-steel mesh
insert
- Key locking doors with anti-luce safety
fasteners
- Full length stainless-steel hinges for added
strength & security
- 3mm thick internal rubber mats
- Side and rear stainless steel mesh
ventilation apertures
- Box is watertight up to the top of the door
sill, with drainage plugs to assist cleaning
- Dog box and drawers, rot & rust proof
- Made from 6mm polypropylene leather grain
effect plastic
- Full length drawer liners
- Air glide drawer system (easy clean and very
low maintenance)
Total Price £2,060 Inclusive of vat & fitting at our Diggle workshop.
-
Optional extras,
- Internal LED lights (includes stainless steel mesh chew guards) £75
- LED Work light £95
- Flettner Slimline or 2000 wind powered roof fan £216.
- Motorised Roof Fan with intake & extract functions £360.
- Removable 12v fan (fixes on door front) £124
- To hard wire the lights and/or fan system into the vehicle with the
on/off switches on dog box. £199 (If this option is not taken then the
fans and lights will be supplied with a wire coming out of the side of the box
with a 12V male plug attached, to plug into a suitable 12V power supply). Spare
12v socket and/or USB socket added to rear of truck £20 per socket (with
the hard wiring option).
- ¼ dividers these split the 2 compartments into smaller compartments. £190
- 12mm internal mat £50
- Tailgate flap £75
- Full floor mat £70
- Tailgate mat £40
- Water container and holder £35
- Door drinkers £58 each
- Removable storage caddy (fits inside the drawer liners) £75 each
(one drawer liner can hold 2 caddies).
- Dog biscuit/food container with lid (fits inside the drawer liners) £120
- Removable drawer divider system incl
2 dividers £80 per drawer, additional dividers £10 each
Please contact us if you
require a bespoke option of the above system.
Prices are inclusive of VAT and
fitting.
Delivery
price available dependant on location, POA.
