Double drawer unit
to fit between the wheel arches and up to the height of the wheel arches, with
2 sliding liners, each with a stainless-steel locking paddle latch and a 3mm
mat in each liner. The depth of the system below is 1120mm (custom sizes can be
made to suit what you require).
3-compartment dog
box to utilise the full width available, with 3 locking doors with handles and
double anti luce catches, full-length stainless-steel hinges for extra
strength, escape hatches at the rear, 3mm internal mats, side, and rear
ventilation apertures 150mm high, side slot handles and drain plugs to assist
in cleaning.
Total cost for above £3,760
STANDARD FEATURES:
- Aluminium doors with stainless-steel mesh insert
- Key locking doors with anti-luce safety fasteners
- Full length stainless-steel hinges for added strength & security
- Escape hatches
- Double Anti Luce catches on each door for extra security
- 3mm thick internal rubber mats
- Side and rear stainless steel mesh ventilation apertures
- Box is watertight up to the top of the door sill, with drain plugs to
assist cleaning
- Dog box and drawer unit, rot & rust proof
- Made from 6mm polypropylene leather grain effect plastic
- “Air Glide” drawer runner system (low maintenance and easy clean)
Optional extras,
- Trunked internal fan system (diffuses the air evenly through the roof
trunking to both sides of the dog box without blowing directly onto the dog(s)
£295
- Internal LED lights (includes stainless steel mesh chew guards) £144
- LED Work light £95 each
- Flettner Slimline or 2000 wind powered roof fan £216.
- Motorised Roof Fan with intake & extract functions £360.
- Removable 12v fan (fixes on door front) £124
- To hard wire the lights and/or fan system into the vehicle with the
on/off switches on dog box. £199 (If this option is not taken then the
fans and lights will be supplied with a wire coming out of the side of the box
with a 12V male plug attached, to plug into a suitable 12V power supply). Spare
12v socket and/or USB socket added to rear of truck £20 per socket (with
the hard wiring option).
- Bumper Protection mat £60
- 12mm Heavy duty internal mat £120
- Door drinkers £58 each
- Jump Board £580
- Side cheek pieces to make the unit look fully fitted up to the van sides
£240
- Fixing kit £25 (consists of 2 straps for fixing box to suitable
anchor points)
- Removable storage caddy (fits inside the drawer liners) £75 each
(one drawer liner can hold 2 caddies).
- Dog biscuit/food container with lid (fits inside the drawer liners) £120
- Removable drawer divider system includes 2 dividers £80 per
drawer, additional dividers £10 each
Please contact us if you require a bespoke option of the
above system.
Prices are inclusive of VAT and fitting.
Delivery price available dependant on
location, POA.
